Submitting your project!

If you're done your project, here's how to submit! Please read carefuly.

Before you submit anything, you should post your project in #highway for feedback! That way, you can make your project as good as it can be before submitting

Requirements

Before submitting, please absolutely make sure of the following:

Your project has a journal in the gallery

YOUR GITHUB REPOSITORY CONTAINS ALL OF YOUR PROJECT FILES:

a BOM, in CSV format in the root directory, WITH LINKS
the source files for your PCB, if you have one
the source files for your CAD model, if you have one
ANY other files that are part of your project.

YOUR README.md FILE CONTAINS THE FOLLOWING:

A short description of what your project is
A couple sentences on why you made the project

PICTURES OF YOUR PROJECT
A screenshot of a full 3D model with your project
A screenshot of your PCB, if you have one
A wiring diagram, if you're doing any wiring that isn't on a PCB
A BOM in table format at the end of the README

YOUR JOURNAL.md FILE CONTAINS THE FOLLOWING:

Dates
Time spent per day
Pictures/videos of what you're working on
Total time spent on the project at the top of the file

YOU DO NOT HAVE:

AI Generated READMEs or Journal entries
Stolen work from other people
missing firmware/software

MISSING ANY OF THE ABOVE IS AN AUTOMATIC REJECTION. TICK THROUGH EVERY ITEM INDIVIDUALLY

Submitting

Once you are absolutely sure you have met the above requirements, post your project in #highway-pitstop! Here's what you should include:

**Name of project: **
**GitHub Repository Link: **

Description: 

(pictures of your project)

Once you're done that, fill out the following form:

https://forms.hackclub.com/highway

It'll send over your project to our queue to be approved! When we review it, you'll get a reply on your message in #highway-pitstop!

We'll try to get back to you within 3-4 weekdays.

Please do not use #highway-pitstop for anything other than submitting

Next steps

If you get approved, you'll get an HCB card grant in your email within 12 hours!

If it gets rejected, you may have to wait up to 1 week before being re-reviewed

Submitting your final build

Finished building your project IRL?

Two things you need to do:

1. Post a demo on Reddit! Here's an example of a post by @cyao.
2. For those who made a custom project - make a magazine page for it! Instructions on this Figma design file - we're going to physically print out a magazine, where each page has a project on it.

Then, fill out the Demo Form - we'll look at it in a few days and let you know if it's been approved!