June 23rd: Schematic

For this project, I'm making a pcb with 5 LEDs (one for each prong) for my wand! Originally I wanted to add an accerleometer as well so I could control the LEDs, but first I wanted to design a simple one before I get into researching on how I'd excecute that.

It's getting late so I only got to finish the schematic since I needed to know what footprints to use.

Total Time Spent: 1 hour

June 24th: PCB

I finished designing the PCB and routing took up the most time because I suck at placing my components efficiently. I am actually not going to be placing my switch and my button on the PCB, but I'm going to be soldering wires that connect it to the base of my wand.

Total Time spent: 1 hour