Day 0 ~1 hour

Today i fought of the idea, took some scrap parts from previous attempts at this, and got to thinking on how to do this! Will use the Raspi w, with rapsis ultrawide camera, and a multi-functional button. Except for that, i found appropiate chargers, voltage regulators, etc, so my camera can be directly charged and powered by batteries. Many of the time though, was spent on researching how to repel saltwater, bc it turns out normal seals won't work (thats why phones are only fresh-water proof). Salt and chlorine would eat away at it. So i will use a well designed case, with silicone and a hardening paste at each whole for isolation. The mice hole, and the charging hole will be properly isolated by 3dprinter caps. Same with the button, it will be covered by flexible meterial, so i can click it without making it wet inside.