Transmitter Receiver Using Esp32s3

Created by @anshumandocx

ESP32S3 Transmitter and Receiver

  • Title: ESP32S3 Transmitter and Receiver
  • Author: Anshuman Tripathy
  • Description: Transmitter and Receiver with 10 channel and a OLED Display.
  • Created_at: 2025-06-10
  • Total Time spent- 22hr

DAY 1- 17th June 2025: Started out with the Project

Reasearched and planned out on what features the transmitter will have searched for the componets read the Datasheets. Since its my first time using esp32 s3 so i had to read the datasheet and look at example circuits properly. So, finally will be using these - ESP32 S3 Wroom 1u - SSD1309 2.42 inch oled - 2 joysticks 2 potentiometes and 4 switched. - nrf24l01 for rf communication.

Also, started out with the scheamtic

image

time spent- 5 hr

Day 2 - 22nd June 2025: PCB

Assigned, arranged th components on the PCB and also complted the routing. Its still a wip would need to complete a few things before finally completing it.

image

time spent- 4hr

Day 3 - 24th June 2025 : PCB AND CAD

Completed the PCB and started and complted a major chunk of the front portion of the transmitter where all the joysticks switches and Joysticks will be connected to. The majority of the time was spent making the CAD. However its still not completed since i still need to make a place to hold the PCB in place.

image

image

Time Spent 6hr

Day 4 - 28th June 2025: Backplate and Sticks

made the backplate for the case and the sticks for the joysticks.

image

image

time spent- 4 hr

Day 5- 29th June 2025 - RECEIVER

Started and completed the receiver p simple circuit still was very happy to see no errors

image Screenshot 2025-06-29 193455

time spent- 2hr